AERO TOOL SETS Archives - Sfmkart.com

J.SEL – 3/8″ Spline long-reach sockets

admin — Thu, 01 Dec 2022 09:58:56 +0000

MIL-W-8982
• Profile adapted to aerospace fasteners.
• The Spline profile ensures high versatility. It is compatible with Spline,
Torx, 4-, 6- and 12-point fasteners. Ensures more effective tightening
with less effort.
• Thin wall.
• High performance level.
• Bright chrome finish.

The post J.SEL – 3/8″ Spline long-reach sockets appeared first on Sfmkart.com.

57L.SPL – Spline 15° hinged long-reach offset-ring wrenches

admin — Wed, 30 Nov 2022 10:48:31 +0000

AS 954G MS-33787 MIL-W-8982
• Spline profile 15° angled long wall offset-ring ratchets
for aeronautical fasteners.
• Thin wall and long profile for maximum accessibility.
• Wrenches used in engine assembly and maintenance.
• The spline profile applies more torque with less strength as the tightening
contact surface is higher.
• The contact points of a Spline wrench are always far from the nut’s angles.
This limits wear of the nuts.
• The Spline profile ensures high versatility. It is compatible with Spline, Torx,
4-, 6- and 12-point fasteners.
• Spline sizes: from 7 to 32
• Black phosphate finish.

The post 57L.SPL – Spline 15° hinged long-reach offset-ring wrenches appeared first on Sfmkart.com.

57L – Metric 15° hinged long-reach offsetring wrenches

admin — Tue, 29 Nov 2022 12:57:36 +0000

AS 955
• 15° thin wall long-reach offset-ring wrenches.
• Thin wall and long profile for maximum accessibility.
• Wrenches used in engine assembly and maintenance.
• OGV profile 12-point ring for powerful tightening.
• Sizes in mm: from 5.5 to 22
• Black phosphate finish.

The post 57L – Metric 15° hinged long-reach offsetring wrenches appeared first on Sfmkart.com.

56A – Inch 10° hinged short-reach ring wrenches

admin — Tue, 29 Nov 2022 12:41:39 +0000

ASME B107.100
• Short-reach 10° offset-ring wrenches.
Recess allows to pass fingers or an obstacle.
• The short-reach series increases accessibility.
• Ergonomic handle to apply torque while maintaining comfort of use.
• For 56A.3/16X7/32 6-point.
• OGV® profile 12-point ring for powerful tightening while protecting the nut.
• Inch sizes 3/16″ to 13/16
• Satin chrome finish.

The post 56A – Inch 10° hinged short-reach ring wrenches appeared first on Sfmkart.com.

56L – Inch 10° hinged long-reach ring wrenches

admin — Tue, 29 Nov 2022 12:28:15 +0000

ASME B107.100
• Long-reach 10° offset-ring wrenches. Recess allows to pass fingers
or an obstacle.
• Ergonomic handle to apply torque while maintaining comfort of use.
• OGV® profile 12-point ring for powerful tightening while protecting the nut.
• Inch sizes 3/16″ to 13/16
• Satin chrome finish.

The post 56L – Inch 10° hinged long-reach ring wrenches appeared first on Sfmkart.com.

59L – Inch long double ended ring wrenches

admin — Tue, 29 Nov 2022 10:53:03 +0000

AS 954
• Offset box end for manoeuvrability in confined spaces.
• Dimensions in inches: from 1/4″ to 13/16″.
• Presentation: satin chrome finish.

The post 59L – Inch long double ended ring wrenches appeared first on Sfmkart.com.

59L – Metric long double ended ring wrenches

admin — Tue, 29 Nov 2022 10:41:55 +0000

AS 955
• Offset box end for manoeuvrability in confined spaces.
• Metric dimensions: from 6 mm to 19 mm.
• Presentation: satin chrome finish.

The post 59L – Metric long double ended ring wrenches appeared first on Sfmkart.com.

Locking-wire pliers 10″

admin — Tue, 29 Nov 2022 10:06:48 +0000

ASME B107.500
• 445.10R = “automatic” model.
• 445.10DS = “reversible” model.
• Side wire-cutter: stainless steel diameter 1 mm.
• 3 turns: 125 mm length.

The post Locking-wire pliers 10″ appeared first on Sfmkart.com.

ACL.1A PROTWIST® ratchet blade holder screwdriver + 15 bits

admin — Mon, 28 Nov 2022 14:24:23 +0000

• High quality 45-teeth ratchet = fast screwing, accuracy, strength
and longevity.
• 3-position bush: screwing, unscrewing and locking (hand selection).
• Storage cap for charger.
• Cap can be used as mini bit holder for use in confined spaces.
• Partially hollow handle to store more bits or screws.
• Bimaterial ergonomic handle for comfortable and reliable screwing.
• Very low blade return torque.
• Powerful magnetic adapter allowing the magnet to hold the bit and screw.
• Magnetised central storage of chargers serves as additional mini bit holder.
• Including 2 chargers:
– 1 charger containing 7 screw bits + 1 separate:
‘ 4 – 6,5 ; ( PH.1 – PH.2 ; § PZ.1 – PZ.2 ; 3 4 – 6.
– 1 transparent charger containing 7 Resistorx bits
1 EXR.110 – EXR.115 – EXR.120 – EXR.125 – EXR.127 – EXR.130 – EXR.140.

The post ACL.1A PROTWIST® ratchet blade holder screwdriver + 15 bits appeared first on Sfmkart.com.

MOD.59LJ6 6-piece metric long double ended ring wrenches in thermoformed tray

admin — Mon, 28 Nov 2022 13:04:08 +0000

• Compatible with the Facom modular storage system:
– Compatible with CHRONO XL, CHRONO+,
JETXL and JET+ roller cabinets.

The post MOD.59LJ6 6-piece metric long double ended ring wrenches in thermoformed tray appeared first on Sfmkart.com.