FACOM TORQUE CONTROL Archives - Sfmkart.com

Torque Calibration Sensors – E.6000-C1000

Mariyah Dahodwala — Tue, 16 Sep 2025 05:58:53 +0000

• Modular system up to 1000 N.m capacity.
• Accuracy exceeds ± 1% in line with ISO 6789.
• Less than 0.5% from 10-100% of the range.
• For use stand alone or with CD12.A calibration bench.
• 2 sets of mounting holes : horizontal or vertical.
• Requires FACOM control software to be installed on a Windows PC with a
spare USB port.
• USB connection to host required for data and power.
• Included square drive adaptors accommodate all drive sizes.
• Supplied in a durable blow moulded storage case, with a calibration
certificate.

The post Torque Calibration Sensors – E.6000-C1000 appeared first on Sfmkart.com.

Torque Calibration Sensors – E.6000-C400

Mariyah Dahodwala — Tue, 16 Sep 2025 05:58:42 +0000

The post Torque Calibration Sensors – E.6000-C400 appeared first on Sfmkart.com.

Torque Calibration Sensors – E.6000-C50

Mariyah Dahodwala — Tue, 16 Sep 2025 05:58:35 +0000

The post Torque Calibration Sensors – E.6000-C50 appeared first on Sfmkart.com.

Torque Calibration Sensors – E.6000-C30

Mariyah Dahodwala — Tue, 16 Sep 2025 05:58:28 +0000

The post Torque Calibration Sensors – E.6000-C30 appeared first on Sfmkart.com.

E.2000 – Torque controllers – E.2000-1000

Mariyah Dahodwala — Tue, 16 Sep 2025 05:58:15 +0000

• Accuracy: ± 1%, ± 1 digit.
• Measuring unit: N.m, lbf.ft, lbf.in.
• Measuring mode: monitor, edge and peak.
• Possible presetting of a limit value and tolerance with orange, green,
red LED indicatror.
• RS232 PC link.
• Dimensions (L. x W. x H.): 150 x 150 x 90 mm.
• Supplied with a calibration certificate

The post E.2000 – Torque controllers – E.2000-1000 appeared first on Sfmkart.com.

E.2000 – Torque controllers – E.2000-350

Mariyah Dahodwala — Tue, 16 Sep 2025 05:58:06 +0000

The post E.2000 – Torque controllers – E.2000-350 appeared first on Sfmkart.com.

E.2000 – Torque controllers – E.2000-50

Mariyah Dahodwala — Tue, 16 Sep 2025 05:57:58 +0000

The post E.2000 – Torque controllers – E.2000-50 appeared first on Sfmkart.com.

DM – Angular tightening gauges – DM.370

Mariyah Dahodwala — Tue, 16 Sep 2025 05:57:50 +0000

• Magnetic attached angle gauge for cylinder heads.
• Allows accurate measurement of angle following tightening
with a torque wrench.
• Flat drum with top reading.
• Drum positioning on the value recommended by the manufacturer,
then tightening to zero.
• Graduations: 2°.
• Male and female square drive.
• Fixed point by flexible with magnet

The post DM – Angular tightening gauges – DM.370 appeared first on Sfmkart.com.

DM – Angular tightening gauges – DM.360

Mariyah Dahodwala — Tue, 16 Sep 2025 05:57:42 +0000

The post DM – Angular tightening gauges – DM.360 appeared first on Sfmkart.com.

Adapters – drive 20 x 7 mm – S.284

Mariyah Dahodwala — Tue, 16 Sep 2025 05:57:34 +0000

• For use with:
– bits 9 x 12 mm on wrenches max capacity 100 N.m.
– bits 14 x 18 mm on wrenches max capacity 600 N.m.

The post Adapters – drive 20 x 7 mm – S.284 appeared first on Sfmkart.com.