CM.150A 333-piece set of industrial maintenance tools
Prices Inclusive of all taxes
₹1,059,085 + Taxes
- Excluding Delivery
- Material Dispatch Subjected to Avaliability
3 Options available:
– CM.150A: Set supplied without container.
– CM.150A-F: Set supplied with 1/3 foam trays (x26)
– JET7.M150A: Set supplied with 7-drawer roller cabinet JET.7GM3
and chest JET.C4GM3
| Qty | Description | |
| 440.JE18 | 18 | 18-piece set of metric combination wrenches |
| 440.26 | 1 | OGV® combination wrench 26 mm |
| 440.27 | 1 | OGV® combination wrench 27 mm |
| 440.28 | 1 | OGV® combination wrench 28 mm |
| 440.29 | 1 | OGV® combination wrench 29 mm |
| 440.3 | 1 | OGV® combination wrench 30 mm |
| 440.32 | 1 | OGV® combination wrench 32 mm |
| 39.JE10T | 10 | 10-piece set of short-reach metric combination wrenches |
| 40.33LA | 1 | Long-reach combination wrench 33 mm |
| 40.35LA | 1 | Long-reach combination wrench 35 mm |
| 40.36LA | 1 | Long-reach combination wrench 36 mm |
| 40.38LA | 1 | Long-reach combination wrench 38 mm |
| 44.JE12 | 12 | 12-piece set of metric open-end wrenches |
| 31.JE6T | 6 | Set of 6 extra-slim wrenches – mm |
| 64C.J2 | 2 | 2-piece set of ratchet wrenches 64Cset |
| 113A.10C | 1 | Chromed adjustable wrench 10″ |
| 113A.6C | 1 | Chromed adjustable wrench 6″ |
| 134A.18 | 1 | Heavy duty pipe wrench 18″ |
| R2NANO | 38 | Box of 1/4″ 6-point sockets |
| S.161-5P12 | 30 | 1/2″ 12-point sockets box + S.161B |
| SXL.180 | 1 | 1/2″ extendable hinged handle |
| K.432E | 16 | 3/4″ 12-point metric sockets set |
| S.306A200 | 1 | Torque wrench 200 N.m with ratchet |
| AT3,5X75 | 1 | Protwist® screwdriver for slotted screws 3.5×75 |
| AT4X100 | 1 | Protwist® screwdriver for slotted screws 4×100 |
| AT5,5X100 | 1 | Protwist® screwdriver for slotted screws 5.5×100 |
| ATD0X75 | 1 | Protwist® screwdriver PZ 0x75 |
| AT4X100 | 1 | Protwist® screwdriver PZ 1×100 |
| AT5,5X100 | 1 | Protwist ® screwdriver PZ 2×125 |
| ATD0X75 | 1 | Protwist® screwdriver PZ 0x75 |
| ATD1X100 | 1 | Protwist® screwdriver PZ 1×100 |
| ATD2X125 | 1 | Protwist ® screwdriver PZ 2×125 |
| ATF6,5X150 | 1 | Protwist ® screwdriver for slotted screws 6.5×150 |
| ATF8X200 | 1 | Protwist ® screwdriver for slotted screws 8×200 |
| ATP0X75 | 1 | Protwist ® Phillips ® screwdriver 0x75 |
| ATP1X100 | 1 | Protwist ® Phillips ® screwdriver 1×100 |
| ATP2X125 | 1 | Protwist ® Phillips ® screwdriver 2×125 |
| ATWDH3X150 | 1 | Protwist ® screwdriver PZ 3×150 |
| ATWH10X175 | 1 | Protwist ® screwdriver for slotted screws 10×175 |
| ATWPH3X150 | 1 | Protwist ® screwdriver PH 3×150 |
| ACL.2A | 1 | Protwist ® screwdriver ratchet shank holder grip |
| AMZ.E | 1 | Reversible bit holder blade 1/4″ |
| AT3.5X100TVE | 1 | Protwist ® 1000v slim screwdriver for slotted screws 3.5×100 |
| AT4X100TVE | 1 | Protwist ® 1000v slim screwdriver for slotted screws 4×100 |
| AT6.5X150TVE | 1 | Protwist ® 1000v slim screwdriver for slotted screws 6.5×150 |
| ATP1X100TVE | 1 | Protwist ® 1000v Phillips ® slim screwdriver 1×100 |
| ATP2X125TVE | 1 | Protwist ® 1000v Phillips ® slim screwdriver 2×125 |
| AV.HT1C | 1 | Protwist ® voltage tester |
| AEF.J1 | 5 | 5-piece set of Microtech ® Protwist ® screwdrivers |
| AFU.1 | 1 | Protwist ® screw starter for slotted screws 7×130 |
| AP8x125 | 1 | Protwist ® square bit 8×125 |
| 83SH.JP9A | 9 | 9-piece set of metric spherical keys |
| 89.JP8A | 8 | 8-piece set of metric keys |
| 181A.25CPE | 1 | Multigrip pliers 250 mm |
| 181A.30G | 1 | Multigrip pliers 300 mm |
| 185A.20CPE | 1 | Sheathed half-round pliers 20 cm |
| 187A.18CPE | 1 | Sheathed combination pliers 18 cm |
| 188A.16CPE | 1 | Sheathed flat-nose pliers 16 cm |
| 189A.17CPE | 1 | Sheathed round-nose pliers 17 cm |
| 191A.22EL | 1 | Jointed front cutting pliers |
| 192A.16CPE | 1 | Sheathed diagonal cutters 16 cm |
| 195A.20CPE | 1 | Sheathed half-round pliers 20 cm |
| 185.34L | 1 | Extra-long pliers 340 mm |
| 405.12MT | 1 | Microtech® axial cutters |
| 495A.22EL | 1 | Heavy-duty end nippers 22cm |
| 167A.18 | 1 | 45° angled nose outside circlip® pliers 18-60 |
| 167A.13 | 1 | 45° angled nose outside circlip® pliers 10-25 |
| 167A.23 | 1 | 45° angled nose outside circlip® pliers 32-100 |
| 169A.13 | 1 | 45° angled nose inside circlip® pliers 12-25 |
| 169A.18 | 1 | 45° angled nose inside circlip® pliers 18-60 |
| 169A.23 | 1 | 45° angled nose inside circlip® pliers 31-100 |
| 501A | 1 | Multiposition long-nose lock-grip pliers |
| 501AMP | 1 | Single position vice pliers |
| 521.2 | 1 | G-clamp pliers with sliding jaw |
| 805.1 | 1 | Slide rule 1/50th – 150 mm |
| 893B.213 | 1 | Tape measure 2 m/13 mm ABS |
| DELA.1051.300 | 1 | Stainless steel 2-sided rule |
| 200C.26 | 1 | Composite riveting hammer 26 mm |
| 200C.32 | 1 | Composite riveting hammer 32 mm |
| 208A.32CBA | 1 | Steel mallet 32 mm |
| 212A.40 | 1 | Mallet |
| 247.G2 | 1 | Sheathed nail set – diam.2 mm |
| 247.G3 | 1 | Sheathed nail set – diam.3 mm |
| 247.G4 | 1 | Sheathed nail set – diam.4 mm |
| 247.G6 | 1 | Sheathed nail set – diam.6 mm |
| 247.G8 | 1 | Sheathed nail set – diam.8 mm |
| 249.G2 | 1 | Sheathed drift punch 2 mm |
| 249.G3 | 1 | Sheathed drift punch 3mm |
| 249.G4 | 1 | Sheathed drift punch 4 mm |
| 249.G6 | 1 | Sheathed drift punch 6 mm |
| 249.G8 | 1 | Sheathed drift punch 8 mm |
| 256.4 | 1 | Precision centre punch-diam.4 mm |
| 257.G | 1 | Sheathed automatic centre punch 1 |
| 263.18 | 1 | Constant-profile chisel length 180 mm |
| 265.2 | 1 | Constant-profile cape chisel length. 200 mm |
| 265.G18 | 1 | Sheathed cape chisel – length 180 mm |
| 603F | 1 | Alu hacksaw |
| 668A.8 | 10 | 10 bimetal saw blades 8 teeth/cm |
| 840.F | 1 | Lock-back knife |
| 844.R | 1 | Interchangeable folding blade |
| 883B | 1 | Chamfer shears 26cm |
| 980C | 1 | Angled blade general-purpose shears |
| 996.5 | 1 | Steel cable cutter diameter 5 mm |
| 779.CBT | 1 | Compact torch |
| 701B | 1 | Multimeter |
| 221.227J2 | 41 | Set of taps and dies |
| 222A.TJ19 | 19 | 19-piece set of bits size 1-10 mm |
| 237.A | 1 | Thread restoring tool |
| 827B | 1 | Magnetic retriever |
| 830A.10 | 1 | Ratchet tool holder d8->105 mm |
| 830A.10L | 1 | Ratchet tool holder d8->300 mm |
| 834B.RTI | 1 | LED telescopic mirror 55 mm |
| STG | 5 | 5 wood handle screwdrivers |
| U.306A140 | 1 | 3-leg puller 7-140 mm |
| U.306G2 | 1 | Spare leg for U.306 |
| U.306M | 1 | Slide hammer – weight 1.6 kg |
| Y.RIV1 | 1 | Aluminium rivet box |
| 237.B | 1 | Thread restoring tool – ISO |
| 270A.MA | 1 | Steel wire brush |
| 235.J1 | 3 | Set of 3 stainless steel scraper |
Related products
-
CM.E16 39-piece set of electronic tools
₹104,515 + Taxes -
CM.EL32 94-piece set of electricians tools
₹162,445 + Taxes -
CM.SE 15-piece set of electronic tools
₹52,298 + Taxes -
CM.140A 200-piece set of industrial maintenance tools
₹346,811 + Taxes -
CM.EM42A 105-piece set of electromechanical tools
₹229,128 + Taxes -
CM.118 118-piece set of universal tools – 6 drawer roller cabinet
₹335,065 + Taxes
Only logged in customers who have purchased this product may leave a review.
Reviews